TABLE OF CONTENTS

Introduction

A Voltage Report allows the user to monitor the battery voltage of his vehicle. Battery voltage monitoring is available for users with Basic+ subscriptions and higher tiers.

Generating a Voltage Report


A Voltage Report is generated by:

 

1. Go to Reports → Voltage Report

2. Set the Start Date (mandatory) and End Date (optional) by typing them in or by clicking on the calendar icons.

3. Select the Start Time, End Time (optional) from their respective drop-down menus.

4. Select the Sensor (mandatory) from its respective drop-down menu. 

5. Select the Reading Average from its respective drop-down menu. Reading Average can either be 1 (showing every single reading recorded by the unit), 3 (showing an average of every 3 readings recorded by the unit), 4 (showing an average of every 4 readings recorded by the unit), 30 (showing an average of every 30 readings recorded by the unit), and 60 (showing an average of every 60 readings recorded by the unit).

6. Click the Generate button to generate the report.

 

It is important to note that voltage readings, obtained directly from the installed device, is processed and recorded at around 4-minutes intervals, therefore:

  • A reading frequency of 1 will show an average of the recorded temperature every 4 to 5 minutes. 
  • A reading frequency of 3 will show an average of  the recorded temperature every 10 to 12 minutes. 
  • A reading frequency of 4 will show an average of the recorded temperature every 15 to 16 minutes. 
  • A reading frequency of 30 will show an average of the recorded temperature every 2 hours (120 minutes).
  • A reading frequency of 60 will show an average of the recorded temperature every 4 hours (240 minutes).


Voltage reports can be represented by a graph. This can be done by clicking the  Show Graph button.


All generated reports can be sorted in an ascending or descending order using a particular column as the sorting point. To sort the report using a particular column:

 

1. Hover over the required column header in the report.

2. Click on the down downwards triangle arrowhead (⏷). 

3. Select between Sort Ascending and Sort Descending from the drop-down menu.

 

Voltage Reports can be either printed, exported to Microsoft Excel, Exported as CSV file by clicking the Print, Export to Excel or Export to CSV buttons respectively.